Find & Pass

Florida Air Conditioning Contractor exam prep: Class A and B Trade Knowledge

Practice for the General Trade Knowledge part of the Florida Class A or Class B air conditioning contractor exam with 130 original questions, each checked against the Florida Building Code - Mechanical, the Energy Conservation code, OSHA, EPA refrigerant rules or HVAC math, with the section to look up. Then take timed exams at the real pace: 130 questions in 7½ hours for Class A, or 80 in 5 hours for Class B.

Get full access: $69 Try 10 free questions

One-time $69 · 6 months of access · English and Spanish included · 14-day money-back guarantee

The exam at a glance

FormatComputer-based at a Pearson VUE test center, offered daily
Class A130 questions, 7½ hours
Class B80 questions, 5 hours (license limited to 25 tons cooling and 500,000 Btu heating per system)
Passing score70%
Open bookYes. Only books on DBPR's reference list; permanently attached tabs allowed. Bring an architect's scale.
Main referencesFBC-Mechanical 2023, FBC-Energy Conservation 2023, OSHA 29 CFR 1926, SMACNA duct standards, NFPA 90A/90B/96, Refrigeration & Air Conditioning Technology, AC&R Troubleshooting Handbook, Trane Ductulator
LanguageEnglish or Spanish (request Spanish on your application)

Sources: DBPR Construction candidate information booklet, the Air A and Air B General Trade Knowledge examination content information, and the Air B reference list (valid 2026). Both licenses also require the Business and Finance exam. Always check the current versions on DBPR's site before you book.

What the exam covers

DBPR publishes the content areas and how much each one weighs. Our bank follows the same outline, and the timed exams draw questions in about the same mix.

Content areaShare of examOur questions
A. Pre-Installation12%15
B. Sheet Metal Ducts9%14
C. Installation of Refrigeration and HVAC Systems22%23
D. Installation of Equipment Components14%16
E. Maintenance Analysis10%14
F. Maintenance Service14%19
G. Safety and Equipment10%13
H. Energy Management5%9
I. Indoor Air Quality4%7

Weights shown are DBPR's Class B outline. The Class A outline uses the same nine areas with nearly the same weights (A 14, B 9, C 23, D 14, E 9, F 14, G 9, H 5, I 3 percent).

Tab your references for an open-book exam

Open-book exams reward speed at finding things. DBPR allows permanently attached tabs with only normal chapter or page headings, but not Post-it notes, pull-off labels or removable tabs. Start with these tabs, then add your own as you practice:

Tab thisWhere it is
Equipment access, attic passageways, rooftop accessFBC-Mechanical s. 306
Condensate drains and auxiliary pansFBC-Mechanical s. 307
Duct materials, joints, flex duct, insulation, smoke detectorsFBC-Mechanical Ch. 6 (602–607)
Refrigeration systems, piping, machinery rooms, field testsFBC-Mechanical Ch. 11 (1101–1108)
Duct insulation, duct leakage testing, equipment sizingFBC-Energy Conservation R403 (residential) and C403 (commercial)
Duct construction tables and seamsSMACNA HVAC Duct Construction Standards; SMACNA Fibrous Glass Duct Construction Standards
Gas cylinders, electrical lockout, laddersOSHA 1926.350, 1926.417, 1926.1053
Superheat, subcooling, charging, refrigerant managementRefrigeration & Air Conditioning Technology (charging and refrigerant management chapters)
Troubleshooting chartsAC&R Troubleshooting Handbook
Duct sizing (friction and velocity)Trane Ductulator

Every course question has a "Where would I look this up?" button so you can practice finding the answer in your book before you answer.

Try 10 free questions

Original practice questions, not real exam questions.

What you get

Air Conditioning Trade Knowledge

$69 one time

6 months of access on any device. No subscription.

Get full access: $69

14-day money-back guarantee · Terms

Secure checkout by Stripe. Test preparation only; see our terms and privacy policy. Already bought? Open the course and leave a review from inside it.

Also need the Business and Finance exam? See our Florida contractor Business & Finance course.

Frequently asked questions

Does this cover Class A or Class B?

Both. DBPR's Class A and Class B Trade Knowledge exams use the same nine content areas with nearly the same weights; Class A is longer (130 questions, 7½ hours) than Class B (80 questions, 5 hours). The course has a timed simulation for each. The license also requires the Business and Finance exam, which we cover in a separate course.

Is the exam open book?

Yes. You may bring only the books on DBPR's air conditioning reference list, plus an architect's scale. Permanently attached tabs with normal headings are allowed; Post-it flags and removable tabs are not, and you can't mark the books during the exam.

Are these real exam questions?

No. Every question is original. Code questions are checked word for word against the 2023 FBC-Mechanical and FBC-Energy Conservation; safety and refrigerant questions against OSHA 29 CFR 1926 and EPA's 40 CFR Part 82 Subpart F; math questions are recalculated. EPA's refrigerant rules aren't a separate book on DBPR's list, but they are covered in the reference textbook and in field practice. We never use or recreate actual exam questions.

How much of the question bank is shared with your other courses?

All 130 questions were written for this course. An automated overlap scan finds 0 that match questions in our other courses.

Can I take the exam in Spanish?

Yes. DBPR's construction examination application says the exams are offered in Spanish: request the Spanish exam on your application and you receive a booklet printed in both English and Spanish. One word-for-word translation dictionary is allowed. The reference books themselves are in English. This course includes a full Spanish version at no extra charge.

What if it's not for me?

Email us within 14 days of purchase for a full refund, no questions asked.