Florida Roofing Contractor exam prep: Trade Knowledge
Practice for the General Trade Knowledge part of the Florida roofing contractor exam with 140 original questions, each checked against the Florida Building Code, OSHA 29 CFR 1926 or the trade references, with the section to look up. Then take timed 80-question exams at the real 5-hour pace.
Get full access: $69 Try 10 free questions
One-time $69 · 6 months of access · English and Spanish included · 14-day money-back guarantee
The exam at a glance
| Format | 80 equally weighted questions, computer-based (CBT) at a Pearson VUE test center, offered daily |
| Time | 5 hours, about 3¾ minutes per question |
| Passing score | 70% |
| Open book | Yes. Only books on DBPR's roofing reference list; permanently attached tabs allowed |
| Main references | Florida Building Code - Building 2023 (Ch. 15), FBC Test Protocols for HVHZ, OSHA 29 CFR 1926, NRCA Roofing Manuals, SMACNA Architectural Sheet Metal Manual, Walker's Building Estimator's Reference Book |
| Language | English or Spanish (request Spanish on your application) |
Sources: DBPR Construction candidate information booklet, Roofing General Trade Knowledge examination content information and the Roofing reference list (valid 2026). The roofing license also requires the Business and Finance exam. Always check the current versions on DBPR's site before you book.
What the exam covers
DBPR publishes the content areas and how much each one weighs. Our bank follows the same outline, and the timed exams draw questions in about the same mix.
| Content area | Share of exam | Our questions |
|---|---|---|
| A. Built-Up Roofs | 15% | 28 |
| B. Shingles and Shakes | 15% | 32 |
| C. Architectural Metal Roofs | 10% | 13 |
| D. Single Ply Systems | 15% | 14 |
| E. Modified Roofing Systems | 15% | 13 |
| F. Concrete and Clay Tile Roofs | 10% | 11 |
| G. Membrane Waterproofing | 5% | 5 |
| H. Drain and Gutters | 5% | 7 |
| I. Equipment and Safety | 10% | 17 |
DBPR lists the share of the 80 questions for each area. Every area also draws on plan reading, code reading and roofing math.
Tab your references for an open-book exam
Open-book exams reward speed at finding things. DBPR allows permanently attached tabs with only normal chapter or page headings, but not Post-it notes, pull-off labels or removable tabs. Start with these tabs, then add your own as you practice:
| Tab this | Where it is |
|---|---|
| Minimum slopes and underlayment by roof covering | FBC-Building Ch. 15, s. 1507 (one subsection per covering) |
| Flashing metal thickness | FBC-Building Table 1503.2 |
| Wind resistance of shingles and tile | FBC-Building s. 1504 and 1609.6 |
| Reroofing and recovering | FBC-Building s. 1511 |
| High-Velocity Hurricane Zone rules | FBC-Building s. 1512–1525 and the HVHZ Test Protocols (RAS/TAS) |
| Fall protection for roofing work | OSHA 29 CFR 1926.500–.503 (Subpart M) |
| Ladders, hoists, fire protection and torches | OSHA 1926.1053, 1926.553–.554, 1926.150–.152, 1926.352 |
| Application practice by system | NRCA Roofing Manuals (Membrane, Steep-Slope, Metal Panel/SPF, Architectural Metal Flashing) and NRCA Waterproofing Manual |
| Gutters, downspouts and sheet metal details | SMACNA Architectural Sheet Metal Manual |
| Squares, bundles and waste (estimating) | Walker's roofing chapter; Roofing Construction and Estimating |
Every course question has a "Where would I look this up?" button so you can practice finding the answer in your book before you answer.
Try 10 free questions
Original practice questions, not real exam questions.
What you get
- 140 original questions across all 9 content areas, in English and Spanish
- Every answer explained, with the Florida Building Code section, OSHA rule or trade reference to check
- Timed 80-question exams at the real 5-hour pace, scored against the 70% line, with unlimited retakes
- Practice by topic and difficulty, review what you missed, and a readiness meter weighted like the exam
- Tabbing guide for the roofing reference books
Roofing Trade Knowledge
6 months of access on any device. No subscription.
Get full access: $6914-day money-back guarantee · Terms
Secure checkout by Stripe. Test preparation only; see our terms and privacy policy. Already bought? Open the course and leave a review from inside it.
Also need the Business and Finance exam? See our Florida contractor Business & Finance course.
Frequently asked questions
What does this course cover?
The General Trade Knowledge exam for a Florida certified roofing contractor (80 questions, 5 hours, 70% to pass). The license also requires the Business and Finance exam, which we cover in a separate course.
Is the exam open book?
Yes. You may bring only the books on DBPR's roofing reference list. Permanently attached tabs with normal headings are allowed; Post-it notes, pull-off labels and removable tabs are not. Check the current candidate information booklet before test day.
Are these real exam questions?
No. Every question is original. Code and safety questions are checked word for word against the 2023 Florida Building Code - Building, Chapter 15, and OSHA 29 CFR 1926 (July 1, 2025); math questions are recalculated; trade-practice questions point to the NRCA or SMACNA manual to read. We never use or recreate actual exam questions.
How much of the question bank is shared with your other courses?
All 140 questions were written for this course. An automated overlap scan finds 0 that match questions in our other courses.
Can I take the exam in Spanish?
Yes. DBPR's construction examination application says the exams are offered in Spanish: request the Spanish exam on your application and you receive a booklet printed in both English and Spanish. One word-for-word translation dictionary is allowed. The reference books themselves are in English. This course includes a full Spanish version at no extra charge.
What if it's not for me?
Email us within 14 days of purchase for a full refund, no questions asked.